You can choose from a wide variety of skateboard wheels in a variety of styles and colors. Nothing on your skateboard has as much of an effect on how you travel, roll, and turn as your wheels.
Speed-seekers would agree that narrow skateboard wheels perform so much better and provide more stability than their broader counterparts. How tight should skateboard wheels be? That’s what I’m going to tell you in this article. To what extent does your answer rely on your riding style, skill level, and other factors like security and comfort? See down for more information.
In the end, it’s up to you how tight you want your skateboard wheels to be.
Skateboard wheels can be adjusted in a variety of ways for a better riding experience, and there are advantages and disadvantages to each option. After all, it’s nearly hard to have the optimum wheel alignment without sacrificing one benefit in favor of another.
If you want the best possible performance and handling, you should keep your wheels snug, but not so tight that they become immobile. More fluidity is provided by loose wheels, which make it easier to turn and navigate.
Here are the reasons why you should consider tightening your wheels:
It’s impossible to deny that tight wheels are fast, smooth, and capable of reaching mind-boggling speeds. This will allow you to better regulate your speed, which will result in a more enjoyable and exciting ride.
Tight wheels not only allow you to cruise and freeride at amazing speeds, but they also allow you to alter your riding style. Skateboarding’s versatility is one of its most appealing features.
Rear-End Collision When your wheels make contact with your skateboard, Bite Wheel bite engages and brings an abrupt halt to your progress. As a result, you run the risk of falling or being knocked off your board. This is extremely dangerous and could result in catastrophic injury. At the conclusion of the day, don’t forget to tighten your safety gear.
A more secure ride is made possible by tighter wheels that stay in position and lower the likelihood of friction.
Stability like no other
Stable and secure rides are made possible by tight wheels. Even if you’ve been riding for a long time and have mastered the basics, tighter wheels will safeguard you by distributing your body weight more evenly.
Your ride will be more stable, and you’ll be able to do everything you want with greater confidence.
While tightening your wheels comes with exciting benefits, here are the drawbacks:
Turning Radius Restriction
Wheels that are too tight make it difficult to turn and steer quickly. It’s difficult to make tight twists and curves when your vehicle has little maneuverability. Your journey will be less enjoyable if you have trouble adjusting the tension of your wheels.
If your skating style necessitates a high degree of mobility and adaptability, you’ll want to keep your wheels at a looser setting. For your own safety, be careful not to loosen up too much.
Tricks are incompatible with this.
Tight wheels make it tough to do tricks since they inhibit your fluidity. A trick or two may require a little more effort from you, such as pressing down on the tail of your skateboard.
Alternatively, you can loosen your wheels a little to make making stunts more fun! Then, when riding more lightly, you can loosen your wheels.
For Landing, It’s a Little More Tense.
On loose wheels, landing slightly awry is far more comfortable for the feet and ankles. If your skateboard has tight wheels, you’ll need to exert additional pressure on it to keep it from veering off course. The tighter your wheels, the more difficult it is to achieve a smooth landing.
Although these drawbacks seem discouraging, tight wheels will work to your advantage when you do these activities:
Increasing your downhill speed and stability are both enhanced by tightening your wheels when going downhill. This improves the ride’s smoothness and control, making it more enjoyable.
Tightness is a matter of personal preference and ability level, therefore there is no one-size-fits-all answer. However, as a rule of thumb, keeping it within 70%-80% is advisable.
Skateboarding down a ramp.
If you want to make it down a skate ramp quickly and safely, your wheels must be extremely fast and sturdy. Wheel bite and speed wobbles can occur if the tires aren’t tight enough. This results in a more comfortable and secure journey.
If you’re anything like us when it comes to flexing moves on the skate ramp, you’ll want to keep your wheels reasonably tight.
Flipping Your Skateboard
Every skateboarder’s dream is to master the art of flipping their board. This stunt is pulled off by rotating the board around a horizontal or vertical axis. In order to perform this feat successfully you may need to tweak your wheels.
Finding a balance between slack and tight wheels is the greatest way to ensure a safe and solid landing that’s gentle on the ankles. This will allow you both the fluidity and stability required to perform the trick successfully.
How To Tighten Your Skateboard Wheels
Now that you know how to tighten your skateboard wheels, it’s time to learn how to customize your wheels to your riding style, comfort level, and skill level. To the surprise of many, it’s not as difficult of a task as many believe. All you need is a 12-inch socket or wrench to complete the task.
Using your wrench or socket, tighten or loosen the Nyloc nut on the axle. To check if you’ve made the correct adjustment, grip one of the wheels and shake it. Tighten the wheel if it wobbles sideways.
A rattling sound is a clear warning that your wheels are too loose, and you should fix them immediately. Wheels that don’t fit snugly contribute to sloppy steering. This should be fixed by tightening the axle nut.
You may check your wheels’ tension by spinning one of them – if it doesn’t move for a long time and then suddenly stops, you might want to loosen them up a bit.
For additional information on how to customize your wheels to fit your riding style, see this video and the related Reddit forums:
The solution to the question “How Tight Should Skateboard Wheels Be” is based on the fact that wheels are an incremental portion of a skateboard. When making modifications, keep the following things in mind:
Level of expertise
Riding in a fashionable manner
Comfort and safety
Another thing worth highlighting is the use of high-quality polyurethane wheels from respected companies that are long-lasting and durable.
It’s a good idea to spread the word about this article if you find it useful. Comment below if you’d like to share your ideas!